Views:35 Author:Site Editor Publish Time: 2019-09-29 Origin:Site
1. Before using high-pressure steel wire braided hose, check whether the type and length of the hose meet the requirements of the use application, and then do the sampling pressure test. After the test is passed, it can be used.
Second, check the braided hose joints and hose joints have no exposed steel wire, and then see if the outer rubber layer is separated, if it is used in the industrial dryer, it can not be used.
3. The plating at the joint of the end of the high-pressure steel wire braided hose joint shall not be damaged or peeled off. If it falls off, it cannot be used. If the coating falls off, the sealing will be tight and the liquid leakage will occur.
4. The newly installed high-pressure steel wire braided hose should be cleaned on the inner wall of the pipe before use to prevent the glue and debris from entering the hydraulic system.
The above is a detailed introduction to the problems that should be paid attention to when using high-pressure steel wire braided hoses. Hope it’s helpful.