Author: Site Editor Publish Time: 12-01-2022 Origin: Site
As we know, the printing on hydraulic hoses it is important information about hose identification. The layline runs the length of the hose with information to assist in knowing hose type, size, hose diameter, maximum working pressure, burst pressure, temperature range, manufacturer date and reordering purposes etc.
The below UGW hydraulic hose layline to help you understand each section and its significance.
In this case, the hose's manufacturer is UGW.
Here hose part number is RB2-06, also could adjust to yours.
10mm is hose Inside diameter, which corresponds to 3/8" size DN10. EN857 is hose standard, 2SCis hose type.
Here is 2SC-3/8’’ hose working pressure, 33 MPa/4785 psi, which will adjusted according to different hose type and size.
Here Q421 means this hose be produced in fourth quarter of 2021 year.
This part is very important for you to check the shelf life of the hose. We all know that the storage time of the hose will directly affect the hose life. Under proper storage conditions, shelf life can be ensured by three to five years. If exceed this time, the hose service life may be significantly shortened, we suggest you'd better visually inspect and tested prior to use, avoiding unnecessary losses.
The above information is basic hose printing content, also, it could be adjusted according to customers' requirements. Meanwhile, below whole printing effect on real hose for reference.
Wrapped cover
Smooth cover
Smooth Cover Hydraulic hose EN853 2SN Hose
Also, you may see the tag on the hose, which is also used for identification purposes. Usually, this tag is made according to the customers’ inventory system, it could provide fast and accurate product information, speeding up the replacement. Below picture for reference.
If additional information about the hydraulic hose layline be required, please freely contact us.
